-40%

AudioScience Hono CobraNet 16.16L ASI2430-D4

$ 686.37

Availability: 100 in stock
  • All returns accepted: ReturnsNotAccepted
  • Brand: AudioScience
  • Condition: Open box

    Description

    The Hono CobraNet Custom/ASI2416 is a CobraNet® audio interface in a 1U rack mount format providing up to 16 channels of 48kHz CobraNet receive and transmit. The units can be customized with up to four function specific modules as well as interchangeable connectors for the modules. Module connector options are terminal block, StudioHub+®, 50pin Centronics connector to XLR breakout cables, and 1/4" TRS. The Hono™ CobraNet Custom/ASI2416 features a powerful Texas Instruments 32bit floating point DSP that allows sophisticated switching/mixing. A graphics display on the unit's front panel shows peak meters and CobraNet status.
    ASIControl can be used to set up all internal features of the unit and allows CobraNet routing connections to be set up between the Hono™ Series units and any other CobraNet device on the network. ASIControl is part of the Windows driver install. Cirrus Logic's CobraNet Discovery can also be used for routing connections.
    Main Features:
    • Up to 16 CobraNet input channels and 16 output channels at 48kHz on 100Mbit Ethernet with redundant RJ-45 connectors
    • 4 CobraNet Transmitters and 8 CobraNet Receivers
    • Modular architecture allows up to 4 I/O modules to be inserted into the back of the unit
    • Available modules include eight channel analog I/O, eight channel AES/EBU I/O, eight channel microphone preamp and 16x16 GPIO
    • Powerful floating point DSP provides metering, level control, and up to 20 dB gain on all signal paths
    • Interoperable with AudioScience CobraNet Sound Cards and other 3rd party CobraNet equipment
    • Built-in 90-260VAC power supply
    • 1U rack-mount unit
    • Programmable delay on all audio outputs
    • Module connector options include Terminal Block (Phoenix style), StudioHub+ RJ-45, 50pin Centronics connector (compatible with AudioScience sound cards), and 1/4" TRS
    • Fully programmable with ASIControl including bundle creation and routing
    • LUA scripting extensions for powerful control programming
    Specifications:
    COBRANET INPUT/OUTPUT:
    • Type: CS181022 silicon from Cirrus Logic
    • Network: 10/100BaseT Ethernet with dual redundant RJ-45 connectors
    • Connector: Dual RJ-45
    • Sample Resolution: 16, 20 or 24bit PCM
    • Sample Rate: CobraNet standard 48 kHz
    • Connections: 8 CobraNet receivers and 4 CobraNet transmitters
    • Latency: 1.33, 2.66 or 5.33ms
    • Control Protocol: SNMP using standard CobraNet MIBs.
    SIGNAL PROCESSING:
    • DSP: Texas Instruments TMS320C6713 @ 225MHz
    • Control Protocol: AudioScience HPI using UDP
    ANALOG INPUT/OUTPUT:
    • Type: Balanced
    • Input Level: -10 to +24dBu in 1dBu steps
    • Input Impedance: 10K ohms
    • A/D converter: 24bit over sampling
    • Output Level: -10 to +24dBu in 1dBu steps
    • D/A converter: 24bit over sampling
    • Load Impedance: 600ohms or greater
    • Dynamic Range [1]: >105dB (input or output)
    • THD+N [2]: <0.0015% (input or output)
    • Sample Rates: 48 kHz from CobraNet
    • Frequency Response: 20Hz to 20kHz +0.1/-0.3dB
    • Connectors: 3.81mm Terminal Block, 50pin Centronics type with XLR breakout cables or StudioHub+ compatible RJ45.
    AES/EBU INPUT/OUTPUT:
    • Type: AES/EBU (EIAJ CP-340 Type I / IEC-958 Professional)
    Sample Rates:
    • Input: 32, 44.1, 48 and 96kHz - uses sample rate converter to convert to CobraNet sample rate.
    • Output: 32, 44.1, 48 and 96kHz selectable from any input, CobraNet, or dedicated sync input.
    • Dynamic Range [1]: 140dB, any input to any output
    • THD+N [3]: 135dB, any input to any output
    • Connectors: 3.81mm Terminal Block, 50pin Centronics type with XLR breakout cables or StudioHub+ compatible RJ45.
    SAMPLE RATE CLOCK:
    • Internal: 48kHz from CobraNet
    REGULATORY:
    • FCC Class A (US)
    • CE Mark (EN 55022 Class A, EN55024)
    GENERAL:
    • Dimensions: 1 RU, 19”(482mm) W x 8”(203mm) L x 1.75”(44mm) H
    • Weight: 7 lb (3.2kg) max, with 16 analog inputs/outputs and terminal block connectors
    • Operating Temperature: 0C to 60C
    • Power Requirements: 100-240VAC, 47-63Hz, 25W max
    See Photos for any included inserts, instructions or accessories as if it is not pictured, it is not included.
    Ships via Priority Mail where signature may be required.
    We record serial numbers.